Operations and Management
Ping and Traceroute
officer SEC>> ping x.x.x.x
officer SEC>> ping x.x.x.x from ip y.y.y.y
officer SEC>> traceroute x.x.x.x
officer SEC>> traceroute from ip y.y.y.y
Telnet
officer SEC>> telnet host
officer SEC>> telnet x.x.x.x
Alarms
officer SEC>> show alarms
officer SEC>> show alarms full
Cooling
officer SEC>> show system cooling
ARP and FDB
officer SEC>> show ip arp
officer SEC>> show ip arp int all
officer SEC>> show switch fdb
officer SEC>> show switch fdb address 00:00:5E:00:01:05
officer SEC>> show switch fdb VLAN 10
officer SEC>> show switch fdb interface 1.1
IGMP snooping
officer SEC>> show igmpsnooping
officer SEC>> show igmpsnooping int x.y
officer SEC>> show igmpsnooping counter
officer SEC>> show igmpsnooping mcastgroups full
TRACE The TRACE function allows the user the see realtime protocol debug information. The user must be careful when using this feature as it is possible to overrun the CLI. It is also important to note that even when TRACE is disabled, the TRACE configuration is still present.
officer SEC>> add trace igmpsnooping messagetype all int 1.1
officer SEC>> enable trace output cli
officer SEC>> add trace epsr messagetype
officer SEC>> disable trace
officer SEC>> show trace
officer SEC>> show trace igmpsnooping
officer SEC>> delete trace igmpsnooping
officer SEC>> show trace igmpsnooping
officer SEC>> delete trace epsr
Configuration Management This describes how to manage the configuration of the MAP. The configuration can be stored in two different ways: a binary database and a text file configuration.
officer SEC>> backup config file node1-backup-cfg.txt
officer SEC>> put file node1-backup-cfg.txt tftp server x.x.x.x
officer SEC>> backup database file node1-backup-db
officer SEC>> put file node1-backup-db tftp server x.x.x.x
officer SEC>> restore config file node1-backup-cfg.txt
officer SEC>> restore database file
officer SEC>> backup config
Syslog Configure the system to send syslog messages to a syslog server
officer SEC>> create log output “syslog” syslog server x.x.x.x
officer SEC>> create log filter “syslog”
officer SEC>> add log filter syslog output syslog
officer SEC>> enable log output syslog
officer SEC>> show log output syslog
SNTP Configure the system to use an NTP server for clock synchronization. Note: SNTP prohibits the use of the MAP as an NTP source.
officer SEC>> add sntp server x.x.x.x
officer SEC>> set sntp UTC +01:00
officer SEC>> enable sntp
officer SEC>> show sntp
Online Help
officer SEC>> set ?
ACCESSLIST - The name of the ACCESSLIST(s) containing the RULE to set
ALARMS - Manipulate ALARM information.
BOOTSERVER - A network load file server capable of support TFTP reques
CARD - The slot number for the card being modified . . .
Officer SEC>> set prompt ?
string - The command prompt definition
Officer SEC>> help set prompt
Telesyn 6G Central Fabric Controller Help version 4.0.0 - English Version
SYNTAX:
SET PROMPT=string
DESCRIPTION: