Allied Telesis Support Portal

AR220E System Information

What does the System Information section display on the AT-AR220E?

The System Information selection in the selection window on the left-hand side displays basic information about the Router. Clicking the selection displays the System Information table.

Clicking the Refresh button queries the Router for the latest system information and refreshes the System Information table. The fields in the table are described below:
  • Hardware Version: Displays the version number of the Router’s hardware.
  • Software Version: Displays the version number of the Router’s Software.
  • System Up Time: Displays the amount of time since the Router was last powered ON or rebooted.
  • LAN Status MAC Address: Displays the Ethernet MAC address of the LAN interface of the Router. The number is shown in hexadecimal.
  • IP Address: Displays the IP address of the local LAN interface of the Router. The default is 192.168.1.1.
  • Subnet Mask: Displays the local subnet mask of the LAN interface of the Router. The default is 255.255.255.0.
  • DHCP Start and End Addresses: Displays the status of the DHCP server and the range of IP addresses controlled by the DHCP server.
  • WAN Status MAC Address: Displays the Ethernet MAC (Media Access Control) address of the WAN interface of the Router. The number is shown in hexadecimal.
  • IP Address: Displays the IP address of the Router as seen by external users on the Internet (including your ISP).
  • Subnet Mask: Displays the local subnet mask of the WAN interface of the Router.
  • Gateway: Displays the gateway IP address provided by your ISP.
  • NAT: Displays the status of the NAT.
  • DNS Server: Displays the IP address of the DNS server.
Previous MonthNext Month
SunMonTueWedThuFriSat